Moxa VPORT 254-M-SC-T Uživatelský manuál stáhnout pdf (Strana 53)

VPort 254 User’s Manual System Configuration

4-9

Firmware Upgrade

Take the following steps to upgrade the firmware:

Step 1: Press the Browse button to select the firmware file.

NOTE

For the VPort 254, the firmware file extension should be .rom.

Step 2: Click on the Upgrade button to upload the firmware to the VPort.

Step 3: The system will start to run the firmware upgrade process.

Step 4: Once Firmware Update Success…..Reboot.... is shown, please wait for few seconds

for the VPort to reboot. The reboot process is finished once the STAT LED is lit

continuously in green.

NOTE

Upgrading the firmware upgrade will not change the original settings.

Reset to Factory Default

From the “Reset to Factory Default” page, click on OK (as shown in the following figure) to reset

the VPort to its factory default settings.

NOTE

All parameters will be reset to factory defaults when you use the Factory Default function. For

this reason, if you want to keep a digital copy of the current configuration, remember to export

the sys_config.ini file before using the Factory Default function.

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 97 98

Žádné komentáře

Moxa VPORT 254-M-SC-T Uživatelský manuál Strana 53