Moxa ONCELL G2110-T Uživatelský manuál stáhnout pdf (Strana 77)

OnCell G2100 Series User’s Manual GSM/CSD Connection

5-5

ATTENTION

ATA is the answer command. ATS0=<x> is the auto-answer command. The AT&W command

saves the current settings to the modem.

It is much easier to configure auto-answer with OnCell Configurator. On the GSM Setting tab,

select Enable Auto-answer on ___ Rings and enter the desired number of rings.

ATTENTION

If you are answering a call from a PSTN dial-up modem, type AT+CICB=0 to force the

incoming call to be a data call. Type AT+CBST=7, 0, 1 to select bearer type to V.32 modem

(9600 bps). In addition, type AT&W to save the settings. For further information, please refer to

the OnCell G2100 Series AT Commands Guide on the Document and Software CD.

This task can be performed easily in OnCell Configurator. Select the V32. 9600 option and click

Apply to activate the function.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 104 105

Žádné komentáře

Moxa ONCELL G2110-T Uživatelský manuál Strana 77