Moxa AWK-6222-US-T Instalační příručka Strana 5

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 15
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 4
4
STEP 3:
Once the screws are fixed into the wall, insert the four screw heads through the
large opening of the keyhole-shaped apertures, and then slide the AWK-6222
downwards, as indicated to the right. Tighten the four screws for added
stability.
ATTENTION
To avoid environmental vibration or shock, you can consider a
robust installation with four larger screws, in which the shafts are
between 7.0 mm and 8.5 mm in diameter, and fix the AWK-6222
onto wall directly and tightly.
DIN-Rail Mounting (Optional)
The DK-DC50131 die-cast metal kit can be
bought separately, and enable easy and robust
installation for the AWK-6222. A pair of
DK-DC50131s is needed for DIN-Rail
mounting. To install the DIN-Rail mounting
kits, tightly attach the two DIN-Rail mounting
kits on the rear panel of AWK-6222 with 12
screws. (6 screws for each kit)
Zobrazit stránku 4
1 2 3 4 5 6 7 8 9 10 ... 14 15

Komentáře k této Příručce

Žádné komentáře